Rain Bird ESP-LX User Manual

14 ESP-LX Modular Controller
 If you press “No” (or you don’t respond within several
seconds), the message “No change made” appears. Then the
Clear Programs menu reappears.
 If you press “Yes,” the message “Clearing All Programs A - D.
Please wait…” appears, followed by “Cleared.” Then the Clear
Programs menu reappears.
Restore Defaults
Use this function to erase ALL programming information for all
programs, including start times, watering days, valve run times,
seasonal adjust percentages, rain delay, advanced cycles, valve
settings, and special features (except for the backup programs).
 Turn the dial to “CLEAR PROGRAMS.”
 The Clear Programs menu appears in the display.
 Press “3” to select “Restore Defaults.”
 A warning message appears in the display. Press and hold
“Yes” to delete all programs and load the factory default
settings. Press and hold “No” to leave the programs intact.
NOTE: ALL programming information for ALL
programs will be erased. Make sure you want to do
this before continuing.
 If you press “No” (or you don’t respond within several
seconds), the message “No change made” appears. Then the
Clear Programs menu reappears.

Rain Bird ESP-LX Specifications

General

Enclosure rating	NEMA 3R
Sensor input	Yes
Type	Modular
Enclosure	Indoor/Outdoor
Display	LCD
Programs	4
Master Valve/Pump Start	Yes
Power Source	120V AC
Power supply	Included
Battery backup	Yes (for memory retention)
Cycle and soak	Yes
Mounting	Wall mount