ESP-LX Modular Controller 13
A warning message appears in the display. Press and hold
“Yes” to delete the selected program. Press and hold “No” to
leave the program intact.
If you press “No” (or you don’t respond within several
seconds), the message “No change made” appears. Then the
Clear Programs menu reappears.
If you press “Yes,” the message “Clearing. Please wait…”
appears, followed by “Cleared.” Then the Clear Memory menu
reappears.
All Programs
Use this function to erase start times, watering days, and valve run
times for all four programs. This function will not erase seasonal
adjust percentages, rain delay, advanced cycles, valve settings, or
special features.
Turn the dial to “CLEAR PROGRAMS.”
The Clear Programs menu appears in the display.
Press “2” to select “All PGM.”
A warning message appears in the display. Press and hold
“Yes” to delete all programs. Press and hold “No” to leave the
programs intact.
NOTE: Start times, watering days, and run times for
ALL programs will be erased. Make sure you want to
do this before continuing.
To Next Page
Loading...
