ESP-LX Modular Controller 17
Select Program
Four independent programs are available in the ESP-LX Modular
controller: A, B, C, and D-drip. Multiple independent programs let
you enter watering schedules to meet the requirements of different
types of plant materials, soils, slopes, and shady or sunny areas.
The D-drip program is designed for drip irrigation equipment. The
D-drip program can overlap, or run concurrently, with programs A,
B, or C.
Programs A, B, and C are not allowed to overlap each other. If they
are programmed to overlap, programs A, B, or C will “stack” (run
in consecutive order after the program in progress finishes running).
Program “stacking” prevents excessive flow demand and low water
pressure caused by having too many valves running at one time.
NOTE: It is easier to select one program and
program it completely. Jumping from program to
program can be confusing.
Slide the program select switch under the A, B, C, or D.
Any program-specific information you enter , such as start
times or watering days, will affect only the selected program.
To Next Page
Loading...
Need help?
General
