42 ESP-LX Modular Controller
If you press “Yes,” the message “Please wait. Storing …”
appears, followed by “Stored.” Then the Special Features
menu reappears.
Recall Programs
Turn the dial to “SPECIAL FEATURES.”
The Special Features menu appears.
Press “2” on the Special Features menu.
The Backup Programs menu appears.
Press “2” on the Backup Programs menu.
NOTE: Recalling programs will overwrite any
program information you might have entered since
you last backed up the programs. Before continuing,
make sure you do want to overwrite your current
programs with the stored programs.
A warning message appears in the display. Press and hold
“Yes” to recall all program information. Press and hold “No”
to skip storing the programs.
NOTE: This feature will work properly only if you
have previously backed up your programs, as
described on page 41. If you have not backed up the
programs, you will receive an error message.
To Next Page
Loading...
Need help?
General
