44 ESP-LX Modular Controller
The Backup Programs menu appears.
Press “3” on the Backup Programs menu.
NOTE: Recalling programs will overwrite any
program information you might have entered since
you last backed up the programs. Before continuing,
make sure you do want to overwrite your current
programs with the stored programs.
The display shows the days remaining until the stored
programs are recalled and loaded into the controller’s memory.
If no delay has been set, the display shows “None.”
Press “+” or “–” to set the number of days until the recall,
from 0 to 90 . Then press “Store.”
A warning message appears in the display. Press and hold
“Yes” to store the delayed recall. Press and hold “No” to skip
the delayed recall.
NOTES: This feature will work properly only if you
have previously backed up your programs, as
described on page 41. If you have not backed up the
programs, you will receive an error message.
To cancel a delayed recall once you have stored it,
repeat steps 1 through 7. Set the number of days to
“None.”
To Next Page
Loading...
