- 47 - V08 en, SCC
Format of HACCP data
HACCP-Data are shown in the following format:
*** H A C C P ***
;
; Ch-nr. >>210<< = batch number
(number of stored cooking processes)
; Type >>SCC_101<< = unit type
; Serial nr.>>G11SH151224923212<< = Serial number of the unit
; Version >>SCC - (s/o/C)<< = Soware version of the unit
(„C“ indicates, delay of CleanJet request is activated
Only chain units:
„s“ or „o“ shows unit ran on
(s) Supervisor- or (o) Operator mode.)
; Time >>2011.09.20 12:27:26<< = Starting date and time of the cooking process
; Progr. >>Roast<< = Program name
(if „>><<“ appears, manual mode was used)
; #1 : Gartemp. / cabinet temp.
; #2 : Kerntemp. Soll / core temp. target
; #3 : Kerntemp / core temp.
; #4 : Zeit (Std:Min:Sek) / time (h:min:sec)
; #5 : Temp. Einheit / temp. unit
; #6 : Energie Opt. / energy opt.
; #7 : Energie 1/2 / energy 1/2
; #1 #2 #3 #4 #5 #6 #7
Mode HOT AIR
27 - 26 000:00:00 C 0 -
; Door closed 000:00:00
27 - 26 000:00:01 C 0 -
; Mode STEAM
27 - 26 000:00:03 C 0 -
30 - 28 000:01:00 C 0 -
; Mode COMBI
30 - 28 000:01:04 C 0 -
106 - 60 000:02:00 C 0 -
126 - 103 000:03:00 C 0 -
170 - 140 000:04:00 C 0 -
160 - 150 000:05:00 C 0 -
159 - 155 000:06:00 C 0 -
170 - 162 000:07:00 C 0 -
162 - 162 000:08:00 C 0 -
165 - 161 000:09:00 C 0 -
161 - 161 000:10:00 C 0 -
; end 000:11:00 ; end = End of cooking process
B) Additional indications:
Progr. >>SCC - Universal Roast<< = Indication of selected SCC process
Progr. >>SCC - ~ pork<< = Copied SCC process with new name
Door opened or Door closed = during cooking process
Start (power failed) = Power failure longer than 15 minutes
end (HOME) = Process terminated with Home key
end (RETURN) = Process terminated with arrow back key
end (ERROR) = Process terminated because of error
start ELC = ELC Process started
restart (POWER) = restart aer switching o or power fail
end = Process nished