Operation Quantron E
53
4
Automatic mode with static weighing (AUTO km/h + Stat. kg)
The AUTO km/h + Stat. kg operating mode is recommended for spreading on
uneven hilly terrain and/or for low application rates. Automatic flow factor regula-
tion does not take place during spreading. However, you can use the Weigh
Remnant function to recalculate the flow factor.
a) Select Auto km/h + Stat. kg:
1. Switch on the control unit Quantron E.
2. Fill the hopper with fertiliser.
3. Switch from the Hopper configuration menu to the AUTO/MAN operation
menu.
4. Highlight the AUTO km/h + Stat. kg. selection field
5. Press the Enter key.
The Weigh Quantity window appears.
6. Confirm the New fertiliser selection field with the Enter key.
The flow factors is reset to 1.0.
The control unit switches to the operating screen.
NOTICE
The AUTO km/h + Stat. kg menu only appears on the display if the AXIS W fer-
tiliser spreader has been configured in the factory.
To Next Page
Loading...