RayTalk RA-696 - Routing Configuration



6.3.4 Routing

SpecificRouteProfile:ClickUser>>SpecificRoutefortheSpecificRouteProfile,the‘SpecificRouteProfile’listwillappear.

1)SpecificRoute

SpecificRouteProfile:The SpecificDefaultRouteisusedto controlclientstoaccesssomespecific IP segmentbythespecified
gateway.SpecificRoutingcanbesetupfortheGlobalPolicyandupto5profilescanbeconfigured.









o Destination/ IP Address:The destinationnetwork address or IP ad dress of the destinationhost. Please note t hat, if
applicable,thesystemwillcalcu lateanddisplaytheappropriatevaluebasedonthecombinationof
Network/IP Address
andSubnetMaskthathavejustbeenenteredandapplied.

o Destination / Subnet Netm ask: The subne t mask of the destination network. Select 255.255.255.255(/32) if the
destinationisasinglehost.

o Gateway/IPAddress:TheIPaddressofthegatewayornextroutertothedestination.
57