RayTalk RA-696 - System Management and Utilities; System Time Configuration



10 SystemManagementandUtilities
10.1 SystemTime
ToconfigureSystemTime,goto:System>>Gene ral.

NTP (NetworkTime Protocol) communicationprotocol can be used to synchronizethe system time with remote time server.
Pleasespecifythelocaltimezoneandthe IPaddressofatleastoneNTPserverforadjustingthetimeautomatically(Universal
TimeisGreenwichMeanTime,GMT).
Manualsetupisanotheroption tosetupthesystemtime,if youchooseto setupthesystemtimemanually,please enterthe
Year,Month,Day,thecurrenttimeandclickApplytoactivatethechanges.
NTPServerMode:WhenEnabled,AccessPointsanddevicesinth
eLocalAreaNetworkofthegatewaywouldbeabletousethe
gatewayasaNTPServerfortimereference.

Note:
WhensystemcannotsyncthetimewithNTPserver,allclientswillnotbeallowedtologintosystem.Alsoon‐demandaccounts
cannotbecreated.
77