Need help?Do you have a question about the ReadyLinks GL Series and is the answer not in the manual?
General| Jumbo Frame Support | 9KB |
|---|---|
| Power Input | 100-240VAC, 50/60Hz |
| MAC Address Table | 8K |
| Humidity | 10% to 90% (Non-condensing) |
| Storage Temperature | -10° to 70°C (14° to 158°F) |
Key capabilities and highlights of the GL-x system.
Details on the different models and their port configurations.
Default IP address, netmask, and gateway settings.
Technical details and panel layout for the GL-8xC headend device.
Technical details and panel layout for the GL-8xT headend device.
Technical details and panel layout for the GL-8xMTv2 headend device.
Technical details and panel layout for the GL-4xTH outdoor device.
Technical details and panel layout for the GL-4xCH local device.
Displays basic system information, hardware, software, and status details.
Covers network configuration, including spectrum filtering and node settings.
Manages VLAN settings, including 802.1Q, VLAN VPN, and VLAN mapping.
Configures Quality of Service parameters like rate limit and scheduling.
Manages forwarding mechanisms like unicast, multicast, and IGMP snooping.
Covers security features like login, authentication, IP binding, and ACLs.
Configures Spanning Tree Protocol (STP), RSTP, and MSTP for network loop prevention.
Provides tools for monitoring port statistics, rates, mirroring, and cable diagnostics.
Configures SNMP for network management, including communities and users.
Implements Remote Monitoring for statistics, alarms, events, and history.
Configures Link Layer Discovery Protocol (LLDP) for network topology discovery.
Manages system administration tasks like DHCP, SNTP, accounts, firmware, and reboot.
Process for logging out of the web interface.
To Next Page