1 Overview
1
1 Overview
The GL-x system contains two devices, the Headend Switch GL-8XC/GL-4XCH and the
Client device. It enables IP-based Video, Data and VoIP applications over existing coax
cabling or telephone lines. It is the industry leading solution solving the secure delivery of IP
Multiservice in a high density copper environment.
In a Fiber to the Building (FTTB) network solution, this device can deliver high-speed
networking over legacy wires with significantly lower installation and operating costs, the
legacy wires are those using coaxial cables, telephone lines or power lines. With scalability
of up to 64 units the GL-x solution can scale to serve several hundred of end users
connected on a copper network, GL-x is the Ideal Solution for FTTH MDU Deployments.
1.1 Features
Key Highlights:
• Egress /Ingress rate management control and broadcast storm control
• IEEE 802.1Q tagged VLAN, port based VLAN
• Various QoS capability (IEEE 802.1p / port / Diffserv)
• SFF 8472, Digital Diagnostic Monitor
• Support port mirroring and port isolate
• Support SNMP trap and SNMP client
• MIB Counter
• Upgrade firmware, backup configuration, restore configuration
• Firmware upgrade via TFTP
• IGMP snooping for filtering multicast traffic
• Perfect network management through web browser, CLI, Telnet /serial console
• Support SNMP v1/v2c/v3 for different levels of network management
• Support three level user for manage
• Supports 1Gbps PHY bit rate over single medium
• State-of-the-Art LDPC forward error correction (FEC)
• Remote configuration management integrated on-chip
• Remote one-step firmware upgrade
To Next Page
Loading...
Need help?
General