Assembly
Removing the leather cover
45
5.7.2.2 Connecting the hydraulic hoses (RF90-4, RF90-5)
Screw the connecting hoses to the connections on the hydraulic motor.
Pos: 63 /ZINDEL/Rollref fanlagen/Montage/ Ledercover @ 1\mod_14121 56341772_13349.doc x @ 14010 @ 2 @ 1
5.8 Removing the leather cover
Risk of corrosion
The leather cover that the drive unit is supplied in can cause considerable corrosion
damage in combination with seawater.
Be sure to remove the leather cover before putting the furling system into operation.
Take the leather cover off the drive unit after assembling the furling system.
Stow the leather cover for protecting the drive unit during winter storage.
Pos: 64 /ZINDEL/Rollref fanlagen/Bedien ung/headline_Bedi enung @ 1\mod_14008400943 57_13349.docx @ 13961 @ 1 @ 1
To Next Page
Loading...