7.3.1 Printing with Bluetooth Printers
To ensure a smooth, reliable operation, follow these steps:
1) End fare.
2) Enter End-of-Fare mode (4.3).
3) Provided that the CG3 has been paired with a Bluetooth printer (7.2) the CG3
will scroll the message “Turn on printer, then press fare”.
4) Turn on your printer if you haven’t already done so.
5) Press the Fare button.
6) The connection attempt may take a few seconds. Wait until the printer
indicates that is connected via Bluetooth.
7) Press the Rate Button to print.
As stated above, you can also print a receipt of the last fare by entering the Main
Menu(5.0) and pressing the Rate Button. The CG3 will take a few seconds to connect
to a Bluetooth printer and print a single duplicate receipt.
To Next Page
Loading...
