Internal short-circuit and surge protection.
Multiple communication protocols for communicating with third-party
dispatch systems or our freely available Android app.
How to use this manual
We encourage you to first skim through this guide so that you can familiarize yourself
with the content. Then, carefully read through the sections that are specific to your
requirements.
1.0 CG3 Components
Figure 1
The CG3 consists of the following components, as shown in Figure 1:
1. CG3 taximeter display unit.
2. Cable and bracket assembly, with attached RS-232 serial cable and connector
(see Figure 2 below).
3. Seal-screw and hex-nut.
4. (Optional) USB mini-B adaptor.
To Next Page
Loading...
