To Next Page

To Previous Page

RED DSMC OPERATION GUIDE

955-0020_V5.2, REV-G | 102

CREATE LENS CALIBRATION FILES

The calibration process creates a calibration file for the current focal length of the electronic lens. Calibrate the

lens at each available focal length to create a full lens calibration file.

1. Attach a DSMC Canon Mount or DSMC Nikon Mount to the BRAIN.

2. Attach an electronic lens.

3. Manually set the first focal length you want to calibrate.

4. There are two (2) ways to start the lens calibration process:

‒ When you attach a lens that the camera does not recognize, the “Unsupported Lens Found” dialog box

displays and asks if you want to calibrate the lens. Select Create Custom Lens Config.

‒ Go to Menu > Settings > Maintenance > Calibrate > Lens and select Create....

Questions and Answers:

Need help?

Do you have a question about the RED DSMC EPIC and is the answer not in the manual?

RED DSMC EPIC Specifications

General