RED DSMC OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0020_V5.2, REV-G | 103
The lens calibration process for the current focal length starts and a progress bar displays. Once the
calibration process starts, DO NOT touch the lens, as doing so may cause the lens to calibrate incorrectly.
5. Select OK after the calibration file is created.
6. To calibrate the next focal length, follow the instructions below:
A. Go to Menu > Settings > Maintenance > Calibrate > Lens.
B. Select the calibration file name in the Camera list and select Edit....
To Next Page
