COPYRIGHT © 2014 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.2, REV-G | 144
SET UP INTERNAL TIMECODE
To set up and adjust timecode generated by the BRAIN, follow the instructions below.
1. Go to Menu > Settings > Project > Time Code.
2. Select the desired Time Code Display mode.
3. Set Time Code Source to User Provided.
4. Use the additional controls to sync TOD timecode with the RTC or set manually.
Alternatively, go to Menu > Media > Format Media... to set Edge timecode manually.
The TC indicator in the Lower Status Row remains gray when internal timecode is enabled.
Source: User Provided
To Next Page
Loading...
