EasyManuals Logo

RED DSMC EPIC User Manual

RED DSMC EPIC
197 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
RED DSMC OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0020_V5.2, REV-G | 69
WIDTH/HEIGHT
The Width/Height fields replace the Scale field when you select Absolute from the Mode drop-down menu.
Select the values for the width and height of the guide in pixels.
OFFSET X/Y
Percentage to offset guide from its default centered position. Available range is 0–100%.
100%: Right-aligned (for X offset) and bottom-aligned (for Y offset).
-100%: Left-aligned (for X offset) and top-aligned (for Y offset).
APPEARANCE
Line Style: Select one (1) of the following line styles: Solid, Dashed, or Bracket.
Color: Select the color that has the highest contrast to the scene. The default is White.
Opacity: Set the guide opacity. Available options are 0%, 25%, 50%, 75% and 100%.
RELATIVE TO FRAME GUIDE
Select the Relative to Frame Guide check box to size and position the guide relative to (and have it bounded by)
the Frame Guide instead of the record format.
NOTE: The Relative to Frame Guide check box is available on the Action Guide and Title Guide tabs.
GENERAL TAB
Enable/Disable and select the location (Relative To), color, and opacity of the following elements:
Center: The center crosshair.
Grid: Rule-of-thirds grid.
Shading: The shaded region outside of the area of interest.
TEST SIGNALS
Use the Test Signals menu to replace the video monitor outputs with one of the following video test patterns:
Chip Chart
SMPTE Bars
Luma Ramp
To enable a test signal, select the test signal box. To exit, tap the touchscreen or press the Enter or Menu button
on the DSMC Side Handle or REDMOTE.
If needed, enable an Audio Tone.
NOTE: Test signals are not recordable; they are provided to help align external HD-SDI and HDMI monitors.
4K BROADCAST
The 4K Broadcast menu is only accessible when a RED 4K Broadcast Module is installed.
LOOK
The Look menu includes: Color, Gain, FLUT, Curves, Color/Gamma, and Color Temperature.
The Look settings affect the look of the monitor path, but do not affect the recorded RAW data.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RED DSMC EPIC and is the answer not in the manual?

RED DSMC EPIC Specifications

General IconGeneral
BrandRED
ModelDSMC EPIC
CategoryDigital Camera
LanguageEnglish

Related product manuals