To Next Page

To Previous Page

RED DSMC OPERATION GUIDE: EPIC/SCARLET

LENS

LENS TAB

The options displayed on the Lens tab change based on the attached lens mount.

PL MOUNT

 Enable Power to Lens: Ensures that the BRAIN powers the lens via the lens mount. This feature is enabled by

default, but the camera saves the last selected setting. Deselect when using a Fujinon

T2.9 Cabrio Premier

PL lens. If you disable this feature for the Fujinon Cabrio, re-enable it when using other lenses. For more

information, go to “Fujinon T2.9 Cabrio Premier PL Lenses” on page 212.

 Auto-Detect PL Lenses: By default, this feature is enabled.

 Detect Lens: Detects a lens, if one is attached.

CANON AND NIKON LENS SETTINGS

The options below display when a DSMC Nikon Mount or DSMC Canon Mount is installed with a supported lens.

 Aperture: Enter the aperture value. The range and default depend on the lens.

 Focus: Enter the focal distance. The default value is the value from the lens. The range depends on the lens.

MOTION MOUNT TAB

The Motion Mount menu is only accessible when a DSMC RED MOTION MOUNTis installed. For more information,

see the RED MOTION MOUNT Operation Guide, available at www.red.com/downloads.

MOTOR CONTROL

Use the Motor Control menu to set up the RED 3-Axis Lens Control System. For more information, see the RED

3-Axis Lens Control System Operation Guide, available at www.red.com/downloads.

MAINTENANCE

The Maintenance menu includes: Save Log, Upgrade, Calibrate, Self Test, Restore System, Rediscover, System

Status, and OLPF.

SAVE A LOG FILE

A LOG file is a detailed text file of the processes and operations performed by the DSMC. If you contact RED

for support, you may be asked to send a LOG file.

To save a LOG file, follow the instructions below:

1. Ensure that a REDMAG 1.8" SSD or RED MINI-MAG SSD is properly mounted to the DSMC.

2. Go to Menu > Settings > Maintenance.

3. Select Save Log.

The LOG file is saved as a *.txt file in the SSD root directory.

For more information about RED support or to create a support ticket, go to https://support.red.com.

NOTE: The DSMC automatically saves a LOG file when it is turned off properly and an SSD is mounted.

Other manuals for RED Epic

Questions and Answers:

Need help?

Do you have a question about the RED Epic and is the answer not in the manual?

General