EasyManuals Logo

RED Epic User Manual

RED Epic
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
RED DSMC OPERATION GUIDE: EPIC/SCARLET
COPYRIGHT © 2015 RED.COM, INC 955-0020_V6.0, REV-J | 131
AUTOFOCUS MODES (DSMC, NIKON, AND CANON MOUNTS)
When any of the following conditions are met, the Modes drop-down menu has additional options:
DSMC Nikon Mount and a supported lens is attached. The lens focus switch is set to “A” or “M/A”.
DSMC Canon Mount and a supported lens is attached. The lens focus switch is set to “AF”.
DSMC Canon MOTION MOUNT and a supported lens is attached. The lens focus switch is set to “AF”.
When any of the above conditions are met, the following options display in the Modes drop-down menu:
Single: When you press the key mapped to AF: Start, the camera performs single-shot AF. Optimized for
rapid focus even under low-contrast conditions. Works with both Center and Spot zones.
Continuous: When you press the key mapped to AF: Start, the camera attempts to keep objects in the target
in focus. Works best with good lighting and contrast. Works with both Center and Spot zones.
Touch Track: Dynamically updates a positionable AF point using the touchscreen. Only works with Spot
zone. Keep target on subject while moving across frame, as the lens continuously focuses on that target.
Rack: Enables rack focus. Only works with Spot zone. For more information, go to “Rack Focus” on page
133.
In Single, Continuous, and Touch Track modes, a single target displays on the screen that indicates where
the image will be in focus. In Rack mode, multiple targets display on the screen to indicate the different areas
between which the camera will rack focus.
Press the key mapped to AF Mode: Cycle (REDMOTE/DSMC Side Handle button A default) to cycle through
the Focus Mode options in order.
Autofocus performance may be reduced under the following conditions:
Subject is dark or distant.
Inadequate contrast between the subject and background.
Scene has reflective highlights.
Subject is backlit.
Inadequate surface contrast/detail inside the window.
NOTE: Use Edge mode for assistance in these conditions. For more information, go to “Edge” on page 70.

Table of Contents

Other manuals for RED Epic

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RED Epic and is the answer not in the manual?

RED Epic Specifications

General IconGeneral
SensorMysterium-X
Resolution5120 x 2700 (5K)
Lens MountPL Mount
Frame Rates1-120 fps
Dynamic Range13.5 stops
Recording FormatREDCODE RAW
MediaREDMAG (SSD)
Weight5 lbs (2.3 kg) body only
Sensor Size27.7 mm x 14.6 mm
Operating Temperature32°F to 104°F (0°C to 40°C)

Related product manuals