103
Chapter 10 Basic Simple Interface Mode
Invoked from the start menu “Flash Development Toolkit3.07 Basic”. This is used to simplify the look and
feel of FDT and does not need a Workspace and Project. See Chapter 5 Access Rights for details about
using this in conjunction with user names and passwords. This chapter describes the Basic Simple Interface
Mode; see Chapter 9 for details of the full Simple Interface Mode.
Basic Simple Interface Mode will restore any previous settings on start up. To change the device, kernel or
port settings, the Options->New Settings… menu will invoke the Wizard to collect the new details.
Figure 10-1 FDT Basic File Programming
To Next Page
Loading...
General