iii
iii. Abbreviations
Target / Device
Refers to the
ro
rammable microcontroller or microcom
uter that is connected to the
PC ready for programming.
DLL Dynamic Linked Library
FDT Flash Development Toolkit
F-ZTAT
®
Flexible Zero Turn-Around Time
QzROM One time programmable memory
HEW Renesas High-performance Embedded Workshop
PC Personal Computer
USB Universal Serial Bus 1.1 or above
FDM Flash Development Module (USB interface board)
UPB Universal Programming Board –
Legacy HMSE interface board used with Protocol A (Legacy) kernels.
HMSE Hitachi Micro Systems Europe Ltd –
The former name of part of the Renesas Technology Europe Engineering Division.
FCF
Flash Configuration File – Used to store information about the device and flash
characteristics
DDI
Device Data Image – a hybrid S-Record file format used for storing data for a device
with multiple flash areas.
Kernel
Code which takes control of the device and allows reprogramming functions. This
code is often downloaded to the device.
Micro Kernel
The part of the kernel which gets executed first and allows initial configuration and
downloading of the main kernel.
Main Kernel
The part of the kernel which gets downloaded by the micro kernel and handles
downloading of additional modules (if required) to perform the read / write / blank
check / erase functions etc.
E8 / E8USB
This is a USB interface board. It supports programming over the single wire interface
and clock synchronous programming using the four wire interface.
FoUSB
This is a USB interface board developed by RTA. It is used for Flash Programming
and in-circuit debugging. This is currently not supported by FDT in the Asia region.
Field Programming -
Publishing
The ability to package all kernel and data files into a single file for simplified sending
to another FDT user.
E8Direct
A firmware update to the E8 (using the existing E8 hardware), designed to be as
similar as possible to the FDM
To Next Page
Loading...
General