47
Alert output|** Please reset the board and regenerate the script to retry **
Alert
output|******************************************************************
# Delete the script file which failed
# so that
FDT will wait for it to be regenerated before retrying
delete $script
# Script processing failure handling script example 2
# Disconnect to allow reconnection
Disconnect
# Display a message to the user
Alert
output|******************************************************************
Alert output|********** THE CURRENT SCRIPT PROCESSING HAS FAILED
**************
Alert
output|******************************************************************
Alert output|** Wait For Script Processing will now be
aborted **
Alert output|** To retry, use Tools, Wait for Script, **
Alert output|** Run configuration... and select the configuration **
Alert
output|******************************************************************
#Stop script processing
Abort
4.2.4.2. Save
This saves the FDT Script Configuration file (with the default extension .w4f). FDT will prompt to ask if
you want to execute the saved script immediately.
To Next Page
Loading...
General