21
3.4.2
Choose Device and Kernel (not Generic Boot*)
Select the device you wish to use from the drop-down list. It is possible to have more than one kernel
option displayed, and double clicking on a kernel will open an optional “readme.txt” file that has
information about the kernel (such as the device, version number and the compilers it was created with).
Select the required kernel from the displayed list, or if you have an alternative kernel elsewhere, which is
not in the list, select ‘Other...’ to specify the kernel Flash Configuration File (.fcf).
* For connection to a Generic Boot Device see the “Configuring a Project for a Generic Boot
Device”section.
Figure 3-3 Device and Kernel Selection
To Next Page
Loading...
General