1
Chapter 1 Introduction
The RenesasFlash Development Toolkit (FDT) is an on-board FLASH programming tool for Renesas F-
ZTAT microcomputers that provides a high-performance and user-friendly Graphical User Interface (GUI).
Embedded software development projects created using the Renesas High-performance Embedded
Workshop (HEW) may be programmed into Renesas F-ZTAT devices using FDT.
FDT may also be used as a general purpose S-Record or Hex editor.
1.1 Key Features
• Standard window operation based on the 32-bit Windows
®
GUI.
• Various online help functions.
• Selectable messaging levels.
• Simple programming environment; optionally controls an adapter board.
• Serial communication.
• USB communications supported via USB Interface Boards.
• USB communications directly to selected target devices.
• Wait for Script File facility
• Multiple flash areas in a single image (DDI)
• QzROM programming
1.2 New Features
FDT3.07 has the following new features:-
• Support for Lock Bit commands
• Support for R8C/2x Blank Check embedded function
• BPS (synchronous) selection support for QZ-ROM
• Display Clock Frequency / CKM / CKP in output Window
• SH2A Data Mat Support
To Next Page
Loading...
General