8.1.2.6. Properties.............................................................................................................77
8.1.2.7. Set as current Project...........................................................................................78
8.1.2.8. Remove Project ...................................................................................................78
8.1.2.9. Unload Project.....................................................................................................78
8.1.2.10. Add Files From Kernel Dir................................................................................78
8.1.3 Device Image - Folder .........................................................................................78
8.1.3.1. Remove Folder ....................................................................................................78
8.1.3.2. Rename Folder ....................................................................................................78
8.2 Device File .......................................................................................................................79
8.2.1 Open ‘filename’...................................................................................................79
8.2.2 Add Files... ..........................................................................................................79
8.2.3 Remove Files.......................................................................................................79
8.2.4 Allow Docking ....................................................................................................79
8.2.5 Hide.....................................................................................................................79
8.2.6 Properties.............................................................................................................80
8.2.7 Display Block usage............................................................................................80
8.2.8 Exclude ‘filename’ ..............................................................................................80
8.2.9 User Boot Area....................................................................................................80
8.2.10 Download File to [User Area] /[User Boot Area]................................................80
8.2.11 File Checksum.....................................................................................................80
8.2.12 Compare File->Device Checksum.......................................................................80
8.2.13 Compare File->Device (Complete Device) .........................................................81
8.2.14 Compare File->Device (File Data Only) .............................................................81
8.3 Workspace Properties.......................................................................................................81
8.4 Project Properties .............................................................................................................82
8.5 Configure Flash Project (Flash Properties).......................................................................83
8.5.1 KernelTab............................................................................................................83
8.5.2 Communications Tab...........................................................................................84
8.5.3 Device Tab ..........................................................................................................85
8.5.4 Programmer Tab..................................................................................................86
8.5.5 Modules Tab........................................................................................................88
8.6 S-Record Properties Window ...........................................................................................89
8.6.1 Block Usage Tab .................................................................................................89
8.6.2 Cursor Value .......................................................................................................89
8.6.3 Selection Value....................................................................................................90
8.7 Output Window................................................................................................................90
8.7.1 Copy....................................................................................................................90
8.7.2 Clear Window......................................................................................................90
8.7.3 Save.....................................................................................................................90
8.7.4 Allow Docking ....................................................................................................91
8.7.5 Hide.....................................................................................................................91
8.8 Hex Editor Window..........................................................................................................91
8.8.1 Cut.......................................................................................................................92
8.8.2 Copy....................................................................................................................92
8.8.3 Paste ....................................................................................................................92
8.8.4 Undo....................................................................................................................92
8.8.5 Redo ....................................................................................................................92
8.8.6 Display Unit ........................................................................................................93
8.8.7 Align to 8 Bytes...................................................................................................93
To Next Page
Loading...