10
eRev. 1.08/15/2023
The presence of the crossed-out wheeled bin label on this product implies that the product contains electrical or electronic materials
that may be hazardous and present a risk to human health and the environment when waste electrical and electronic equipment
(WEEE) is not handled correctly. Electrical and electronic equipment must be disposed of in an appropriate manner, separate from
standard unsorted waste streams. Users need to follow local recycling regulations to reduce adverse environmental impact in
connection with disposal of WEEE and to increase opportunities for reuse, recycling, and recovery of WEEE. As legislation and
disposal facilities may vary throughout the European Union member states, please contact Repligen Corporation
(customerserviceus@repligen.com
) for further information regarding the proper disposal of products marked with the crossed-o
ut
wheeled bin label.
F
or disposal in countries outside of the European Union: This symbol is only valid for use within the European Union (EU). If you wish
to discard this product, please contact your local authorities for the correct method of disposal.
Environmental Conditions
For optimal performance, the ambient temperature should be between 20°C and 25°C and held constant (±2 degrees) throughout
operation. The area should be free of dust and have low humidity, with air conditioning recommended.
Acceptable conditions for safe operation: 0°C–48°C, 15%–80% RH (non-condensing), altitude up to 2000 meters.
5. FlowVPX Hardware and Accessories
The following is an introduction to the FlowVPX hardware and accessories, for familiarization of naming and purpose. Please review
all components and warnings before moving on to installation.
When fully assembled with Head, Detector, Flow Cell, and connecting nuts:
Weight: 4.08 kg (9 lbs)
Dimensions: 120 x 100 x 230 mm (4.72 x 3.94 x 9.06 in)
CAUTION: Exposing the FlowVPX Head and Detector to elevated temperatures of 80°C or more may cause damage to
critical components.
CAUTION: Condensation buildup on the system’s components may impact readings. Be aware of sample temperatures
flowing through the FlowVPX System with respect to environment humidity to ensure no condensation appears on
critical optical surfaces.
To Next Page
Loading...