Printing Functions
64
3
Directional Magnification (%)
Prints can be reduced or enlarged at
different reproduction ratios, hori-
zontally and vertically.
a: Horizontal ratio
b: Vertical ratio
Note
❒ You can also select a preset ratio
close to the ratio using [Reduce] or
[Enlarge], and then adjust it further,
using [n] or [o].
A Place the originals.
B Press [Reduce / Enlarge].
C Press [Specified Ratio].
D Press [Direct. Mag.%].
To enter the ratio using the
number keys
A Press [Horizontal].
B Enter the ratio using the num-
ber keys, and then press [#].
C Press [Vertical].
D Enter the ratio using the num-
ber keys, and then press [#].
E Press [OK].
To specify a ratio using [n] and
[o]
A Press [With no].
B Press [Horizontal].
C Adjust the ratio using [n] or
[o].
Note
❒ Pressing [n] or [o] changes
the ratio in increments of 1%.
Pressing and holding down
[n] or [o] changes it in in-
crements of 10%.
❒ If you have incorrectly en-
tered the ratio, readjust it us-
ing [n] or [o].
D Press [Vertical].
E Adjust the ratio using [n] or
[o].
F Press [OK].
E Press [OK].
F Press the {Start} key.
CP2P01EE
To Next Page
Loading...
