1109 1 Checks the fusing nip band ( NIP Band Width Adjustment).
1110* Fan Control Timer
1110 1
[30 to 60 / 30 / 1 s/step]
Inputs the fan control time. The fan maintains normal speed for the specified time after
occurrence of an
SC or following entry into Warm-up mode, Low Power mode, or Night/
Off mode.
1159* Fusing Jam SC Code Setting 0=No 1=Yes
1159 1
This SP mode detects SC559. Set this SP mode to ‘Yes’ if the machine experiences paper
jam problems on a continual basis.
1902 Display-AC Freq.
1902 1
Displays the fusing lamp power control frequency (as detected by the zero cross signal
generator). The displayed value is 1/5 the actual frequency: 10 = 50 Hz, 12 = 60 Hz.
1903*
Feed Clutch Boost
Adjusts the amount of extra push that the feed clutch gives to the paper after the skew has
been corrected at registration. This feature helps the registration roller feed certain types
of paper (such as thick paper). Increase the value if thick paper is jamming after feeding
from the registration roller.
1903 1 By-pass tray [0 to 10 / 6 / 1 mm/step]
1903 2 2nd, 3rd, 4th tray [0 to 10 / 3 / 1 mm/step]
1908*
Optional Tray Adj.
Adjusts the reverse time for the upper and lower paper lift motors.
1908 1 1st optional
[–2 to +2 / 0 / 1/step]
1908 2 2nd optional
1911* By-pass Envelope
3. Appendix: SP Mode Tables
24
To Next Page
Loading...
