MFP Options
D062/D063/D065/D066 2-116 SM
3. Insert the file format converter board into Slot A and fasten it with the screws.
4. Switch the machine on.
5. Set SP5836-3 to "1" to enable the print backup feature.
6. Confirm or set the following SP codes with the values in the table listed below.
SP No. Setting SP No. Setting
5-836-1 1 5-836-73 0
5-836-2 0 5-836-85 1
5-836-3 1 5-836-86 2
5-836-72 0 5-836-91 50
7. Set the following SP codes according to the customer's needs.
SP No. Setting Comment
2
Selects JPEG2000 file format for documents copied from
the document server to Palm2.
Note: Files backed up to Palm2 in J2K format cannot be
edited by other software applications.
SP5-836-94
0
Selects the TIFF file format for documents copied from the
document server to Palm2.
Note: Select this so the backed up files can be used with
other software applications (editing, OCR, etc.) with only
slight loss in image quality.
1
Applies dot correction and eliminates ghost images
transferred from the back sides of double-sided originals
when files are copied to Palm2. This selection also reduces
the size of the file.
Note: This function is applied to both J2K and TIFF files and
is particularly useful for copying large J2K documents
quickly with only a slight loss in image quality.
SP-5836-98
0 Does not apply the features of the "1" setting when files are
Rev. 08/03/2009
To Next Page
Loading...
Need help?
General
