Service Call Conditions
SM Appendix 3-65 D062/D063/D065/D066
Appendix:
Service Call
Conditions
Delete All Error 1: HDD GW
A data error was detected for the HDD/NVRAM after the "Delete All" option
was used.
Note: The source of this error is the Data Overwrite Security Unit running
from an SD card.
874 D
Turn the main switch off/on and try the operation again.
Install the Data Overwrite Security Unit again. For more, see section
"MFP Options" in "Installation".
HDD defective.
Delete All Error 2: Data area GW
An error occurred while the machine deleted data from the HDD
Note: The source of this error is the Data Overwrite Security Unit running
from an SD card.
875 D
Turn the main switch off/on and try the operation again.
Log data abnormal
876 D
An error was detected in the handling
of the log data at power on or during
machine operation. This can be
caused by switching the machine off
while it is operating.
Software error. Update the
firmware
NVRAM defective
HDD defective
Data Overwrite Security SD card error GW
877 B
An error occurred, preventing
successful execution of the Data
Overwrite Security function, even
though it has been set up and
enabled.
DOS card is not inserted completely
into the SD card slot
DOS card has been removed from
the SD card slot.
DOS card is damaged.
Note:
If the SD card has been removed (or
To Next Page
Loading...
Need help?
General
