System Menu
The system menu allows you to set the printer's basic functions. Although you can operate the printer using
the default settings, you can also change its settings to better suit your printing needs. Changes made to
settings remain effective after power off.
System Menu Parameters
This section explains about parameters that can be set on the system menu.
Print Error Report
Select whether or not to print an error report when a printer error or memory error occurs.
Default: [Off]
• On
• Off
Auto Continue
Specify whether or not to continue printing after a system error. When you enable this setting, specify
how long the printer is to display error before resuming print.
When [Auto Continue] is set to on, and a certain error occurs in the printer while printing, the job
might be cancelled, or printing will not be as intended. When a job is cancelled due to error, the
printer automatically begins the next job in the queue.
Default: [Off]
• Off
• Immediate
• 1 minute
• 5 minutes
• 10 minutes
• 15 minutes
Memory Overflow
You can specify whether or not to print a memory overflow error report.
Default: [Do not Print]
• Do not Print
• Error Information
Printer Language
You can specify the printer language.
Default: [Auto]
5. Making Printer Settings Using the Control Panel
120
To Next Page
Loading...
Need help?
General
