Test Printing
Follow the procedure below to print the configuration page.
• The configuration page is printed on A4 or Letter (8
1
/
2
"×11") size paper, so load them in the same
paper tray.
Printing a Configuration Page
Use the following procedure to print the Configuration Page.
1. Press the [Menu] key.
The menu screen appears.
2. Press the [ ] or [ ] key to select [List/Test Print], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Config. Page], and then press the [OK] key.
After the configuration page is printed out, the screen returns to List/Test print menu.
4. Press the [Menu] key.
The initial screen appears.
Interpreting the Configuration Page
The meanings of the items on the Configuration Page are as follows:
System Reference
Machine ID
Shows the serial number assigned to the board by its manufacturer.
Total Memory
Shows the total memory status.
List/Test Print Menu
117
To Next Page
Loading...
