• You can add up to 50 virtual printers. After 50 virtual printers have been added, [Add] will no longer
be displayed.
• p.155 "Access in the Administrator Mode"
Changing a Virtual Printer Configuration
Use this procedure to change a virtual printer configuration.
• You must have Administrators privilege to change the configuration of a virtual printer. Log in using
an account that has Administrators privilege.
1. Log in to Web Image Monitor as an administrator.
For details about logging in, see "Access in the Administrator Mode".
2. In the menu area, click [Configuration], and then click [Virtual Printer Settings] in the "Printer"
category.
A list of the available virtual printers appears.
3. Select the virtual printer whose configuration you want to change, and then click [Change].
If you want to configure this virtual printer for an interrupt printer, select [TCP/IP (Unspecified, Priority)]
in the protocol list.
4. Change the configuration as required.
5. Click [OK].
• For details about virtual printer configuration, see Web Image Monitor Help.
• p.155 "Access in the Administrator Mode"
Confirming a Virtual Printer Configuration
Use this procedure to confirm a virtual printer configuration.
1. Start Web Image Monitor.
2. In the menu area, click [Configuration], and then click [Virtual Printer Settings] in the "Printer"
category.
A list of available virtual printers appears.
Using the Virtual Printer
55
To Next Page
Loading...
Need help?
General
