Maintenance Menu
You can set printing conditions such as density and calibration, and printer management such as deleting
temporary print jobs from the hard disk.
Maintenance Menu Parameters
This section explains about parameters that can be set on the maintenance menu.
Quality Maintenance
Color Registration
You can perform automatic adjustment of color registration.
Color Calibration
You can adjust the gradation of bright (highlighted parts) and medium areas (middle parts) for printing.
For details, see Hardware Guide.
• Adjust Auto Density
You can have color density adjustment performed automatically.
• Print Test Pattern 1
You can print gradation correction sheet 1, and specify the adjustment value for the gradation
of bright areas.
• Print Test Pattern 2
You can print gradation correction sheet 2, and specify the adjustment value for the gradation
of medium areas.
• Reset Setting
You can reset the gradation correction value to default.
Registration
You can adjust the starting position of the printing page.
• Print Test Sheet
You can print the registration test sheet.
Only the installed trays appear on the display panel.
Default: [Tray 1]
• Tray 1
• Tray 2
• Bypass Tray
Maintenance Menu
109
To Next Page
Loading...
Need help?
General
