• Duplex Unit
• Adjustment
You can select the start position for printing on a page.
Only the installed trays appear on the display panel.
• Horizontal: Tray 1
• Horizontal: Tray 2
• Horizontal: Bypass Tray
• Horizontal: Back Side
• Vertical: Tray 1
• Vertical: Tray 2
• Vertical: Bypass Tray
• Vertical: Back Side
4 Color Graphic Mode
This mode adjusts levels of toner color overlap. If characters or lines blur, setting priority on text may
make them clearer. Under normal conditions, set priority on photo.
Default: [Photo Priority]
• Text Priority
• Photo Priority
General Settings
Replacement Alert
Use this function to specify the timing of notifications prompting the user to replace supplies. You can
specify this setting for notifications of print cartridge replacement.
• Print Cartridge
Default: [Normal]
• Notify Sooner
• Normal
• Notify Later
Supply End Option
You can specify whether or not to continue printing after the following components have exceeded
their recommended service life.
Default: [Continue Printing]
• Continue Printing
• Stop Printing
5. Making Printer Settings Using the Control Panel
110
To Next Page
Loading...
Need help?
General
