You can assign a password to a saved document, but password assignment is not mandatory.
The password must be entered when printing or deleting.
5. After making the necessary settings, click [Print].
The document file is saved in the printer.
To print the document, perform the following steps.
For details on deleting the document, see "Stored Print".
Printing a selected Stored Print file
To print a saved job, use the printer’s control panel. For details, see "Printing a Stored Print file using
the control panel".
Deleting a selected Stored Print file
If you want to delete a saved job, see "Deleting Stored Print files".
• p.78 "Printing a Stored Print file using the control panel"
• p.79 "Deleting Stored Print files"
Fit to Paper
When the size of the document and paper size differ, set whether or not to print according to paper size.
The following shows where you can select this function.
[Fit to Paper] is displayed under [General 1] in the [Feature Sets:] list on [Printer Features] in the print dialog
box.
Prompt User
Print is performed with the size of document to be printed unchanged.
Nearest Size and Scale
If the paper size is smaller than the selected paper size, the driver reduces the print size.
If the paper size is larger than the size of document to be printed, print is not to fit the paper size.
Nearest Size and Crop
Print is performed regardless of any differences between selected and actual paper size. However,
the print output is not adjusted to fit the paper size.
Resolution
Use this to set the resolution types.
The following shows where you can select this function.
Using PostScript 3
189
To Next Page
Loading...
Need help?
General
