CLP Simulation1
Use this setting to print blue color more brightly and vividly.
CLP Simulation2
Use this setting to print blue color more brightly and vividly. Print results are lighter than those of CLP
Simulation1.
• Use this to select a color rendering dictionary (CRD). The CRD is referred to color matching, so you
should select the appropriate CRD for the document you are printing. The selected CRD is also referred
to when [Fine] or [Super Fine] is selected for [Color Setting]: The following items are available: [Auto],
[Photographic], [Presentation], and [Solid Color].
Dithering
Use this to set the Image Rendering mode.
The following shows where you can select this function.
[Dithering] is displayed under [General 2] in the [Feature Sets:] list on [Printer Features] in the print dialog
box.
You can select from the following items:
Auto
Use this setting to configure the best dithering method automatically depending on the appearance
of the document to be printed.
Photographic
Performs dithering using an appropriate pattern for photographs.
Text
Performs dithering using an appropriate pattern for text.
Gray Reproduction (Text/Line Art)
Use this to select the Black Color mode for text and line art.
The following shows where you can select this function.
[Gray Reproduction (Text/Line Art)] is displayed under [General 2] in the [Feature Sets:] list on [Printer
Features] in the print dialog box.
You can select from the following items:
Black/Gray by K
Prints black using gray.
Using PostScript 3
193
To Next Page
Loading...
Need help?
General
