• When printing in an environment where classification codes are required, print jobs that do not have
a classification code cannot be printed. For details, see "Configuring Classification Codes".
• p.52 "Specifying the Classification Code for a Print Job"
• p.159 "Configuring Classification Codes"
Configuring Classification Codes
Use Web Image Monitor to specify whether or not to apply classification code requirement to print jobs.
• The configuration page can be printed at any time.
• The default setting for classification code requirement is "Optional".
1. Log in to Web Image Monitor as an administrator.
For details about logging in, see "Access in the Administrator Mode".
2. Click [Configuration] in the menu area, and then click [Logs].
3. Select that [Required] or [Optional] is selected for [Classification Code] in the [Common
Settings for All Logs] column.
If "Required" is selected for the classification code requirement setting in Web Image Monitor, any
print job without a classification code specified will not be printed.
4. Click [OK].
5. Click [Logout].
6. Quit Web Image Monitor.
• p.155 "Access in the Administrator Mode"
Registering Classification Codes
159
To Next Page
Loading...
Need help?
General
