Update Firmware
Select whether or not to prohibit Update Firmware. If you would like to set to Prohibit, contact
your service representative.
Default: [Do not Prohibit]
• Prohibit
• Do not Prohibit
Change Firmware Structure
Select whether or not to prohibit Change Firmware Structure. If you would like to set to Prohibit,
contact your service representative.
Default: [Do not Prohibit]
• Prohibit
• Do not Prohibit
Service Mode Lock
Select whether or not to prohibit entering service mode. This setting may not appear depending on
the setting of the printer.
Default: [Off]
• On
• Off
Firmware Version
Display the firmware version of the printer.
Network Security Level
Specify the network security level.
Default: [Level 0]
• Level 0
• Level 1
• Level 2
Auto Erase Memory Setting
Select whether or not to automatically delete memory. When set to on, specify the overwrite times.
To specify the number of memory overwrites, select [Random Numbers]. This setting appears only
when the optional data overwrite security unit is installed.
Default: [Off]
• On
HDDErase
• NSA
5. Making Printer Settings Using the Control Panel
138
To Next Page
Loading...
