• IP Add.
Manually specify the IPv4 address.
Default: 11.22. 33.44
• Subnet M
Manually specify the subnet mask.
Default: 0.0.0.0
• Gateway
Manually specify the gateway address.
Default: 0.0.0.0
IPv6 Stateless Setting
Select whether to enable or disable stateless IPv6 address auto configuration.
Default: [Active]
• Active
• Inactive
IPsec
This is a security function. For details, contact your administrator.
Default: [Inactive]
• Active
• Inactive
NW Frame Type
Specify the frame type for NetWare.
Default: [Auto Select]
• Auto Select
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
Effective Protocol
Specify the effective protocol.
• IPv4
Default: [Active]
• Active
• Inactive
5. Making Printer Settings Using the Control Panel
142
To Next Page
Loading...
