1. MAINTENANCE TABLES
1.1 LUBRICATION POINTS
Lubricate after removing adhering ink and paper dust.
Lubrication Point Interval Type
Bearings for the drum drive shaft Yearly Oil
Bearing for each cam shaft Yearly Oil
Bearing for the main motor shaft Yearly Oil
Bearing for the speed reduction shaft Yearly Oil
Gears on the drum drive shaft Yearly Grease
Gears for each cam Yearly Grease
Paper feed sector gear Yearly Grease
Second feed sector gear Yearly Grease
Edge of each cam Yearly Grease
Master pressure plate groove Yearly Grease
Type of Oil and Grease
Oil: Motor Oil (SAE No.30)
Grease: Shell Albania No.2
1.2 USER’S MAINTENANCE
Please advise the customer to clean each item at suitable intervais.
Cleaning Point Interval Cleaner
Original platen cover At any time Cloth and water
Exposure glass At any time Cloth and glass cleaner
Paper feed rollers At any time Cloth, and soap and water (or alcohol)
Press roller At any time Cloth, and soap and water (or alcohol)
SM 4-1 C224
To Next Page
Loading...
