Service RAM Addresses
D361/D510 186 SM
Bit 2 Bit 1 Setting
0 0 The machine receives all the fax messages.
0 1 The machine receives fax messages with RTI or CSI.
1 0
The machine receives fax messages with the same ID
code.
1 1 The machine does not receive anything.
Bit 3: Not used
Bit 4: Not used
Bit 5: Just size printing, 0: Off, 1: On
Bit 6: Not used
Bit 7: Add paper display when a cassette is empty. 0: Off, 1: On
6800D6(H) - User parameter switch 06 (SWUSR_06)
Bits 0 to 5: Not used
Bit 6: Scan sequence in Book transmission, 0: Left page then right page, 1: Right page
then left page
Bit 7: Not used
6800D7(H) - User parameter switch 07 (SWUSR_07)
Bits 0 and 1: Not used
Bit 2: Parallel memory transmission, 0: Off, 1: On
Bits 3 to 7: Not used
6800D8(H) - User parameter switch 08 (SWUSR_08)
Bits 0 and 1: Not used
Bit 2: Authorized reception
0: Only faxes from senders whose RTIs/CSIs are specified for this feature are
accepted.
1: Only faxes from senders whose RTIs/CSIs are not specified for this feature are
accepted.
Bits 3 to 7: Not used
6800D9(H) - User parameter switch 09 (SWUSR_09): Not used
To Next Page
Loading...
