Ricoh D017 - Commonly Used Sp Codes and Features; Test Pattern Printing (Sp)

Service Program Mode
D017/D018/D019/D020/D084/D085 5-5 SM
System
Maintenance
5.1.4 COMMONLY USED SP CODES AND FEATURES
This section is a summary of commonly used SP codes.
For details about the input/output checks, please refer to the SP code tables:
Input Check Output Check
Main Machine SP5803 SP 5804
ARDF SP 6007 SP 6008
Finisher SP 6117 SP 6118
Test Pattern Printing (SP2902)
 You can print a test pattern to confirm correct operation of the machine.
1. Enter the SP mode and select SP2902.
2. Enter the number for the test pattern that you want to print and press
. (See the
tables below.)
3. Press Copy Window to open the copy window and then select the settings for the test
print (paper size, etc.)
4. Press Start q twice. (Ignore the "Place Original" messages) to start the test print.
5. Press SP Mode (highlighted) to return to the SP mode display.
No. Test Pattern
0 None
1 Vertical Line (1dot)
2 Horizontal Line (1dot)
3 Vertical Line (2-dot)
4 Horizontal Line (2-dot)
5 Grid Pattern (1dot)