Ricoh D017 - Blank Margin

Copy Adjustments: Printing/Scanning
D017/D018/D019/D020/D084/D085 4-73 SM
Replacement
and
Adjustment
Blank Margin
 If the leading edge/side-to-side registration cannot be adjusted within the
specifications, adjust the leading/left side edge blank margin.
1. Check the trailing edge and right side edge blank margins, and adjust them using the
following SP modes.
SP mode Specification
Trailing edge SP2-101-2/3/4 3 ± 2 mm
Right edge SP2-101-6 2 +2.5/-1.5 mm
Leading edge SP2-101-1 3 ± 2 mm
Left edge SP2-101-5 2 ± 1.5 mm
Trailing edge (duplex
copy, 2nd side)
SP2-101-7 2 ± 2 mm
Left edge (duplex copy,
2nd side)
SP2-101-8 2 ± 1.5 mm
Right edge (duplex
copy, 2nd side)
SP2-101-9 2 +2.5/-1.5 mm