PICK-UP/PAPER FEED/REVERSE ROLLERS
SM 19 B391
Large
Capacity Tray
B391
3.11 PICK-UP/PAPER FEED/REVERSE ROLLERS
1. Remove the paper tray unit (see Paper Tray Unit Replacement).
2. Remove the snap ring (1 each for the paper feed and reverse rollers).
3. Remove the pick up roller [A].
4. Replace each roller [B], [C].
NOTE: Install the paper feed rollers the correct way round, as shown in the
illustration. If the rollers are installed incorrectly, this will cause the one-way
clutch to lock.
B391R115.WMF
[A]
[B]
[C]
To Next Page
Loading...
