Ricoh D017 - Installation Procedure

Paper Feed Unit (D331)
SM 2-18 D017/D018/D019/D020/D084/D085
2.3.2 INSTALLATION PROCEDURE
 Unplug the machine power cord before starting the following procedure.
 The handles of the main machine for lifting must be inserted inside the machine and
locked unless these handles are used for the installation or relocation of the main
machine.
 You need two or more persons to lift the copier. The copier is highly unstable when
lifted by one person, and may cause human injury or property damage.
1. Remove the strips of tape.
2. Put the copier [A] on the paper tray unit [B].
 When you install the copier, be careful not to pinch the cable [C].