Ricoh D017 - Memory All Clear (Sp)

Service Program Mode
SM 5-8 D017/D018/D019/D020/D084/D085
Memory All Clear (SP5801)
Executing Memory All Clear resets all the settings stored in the NVRAM to their default
settings except the following:
 SP2989 1-5: PCU ID (South Korea Only)
 SP2990 1-5: Original Toner ID (South Korea Only)
 SP2991 1-5: Original Toner Counter (South Korea Only)
 SP5811 1: Machine serial number
 SP5907: Plug & Play Brand Name and Production Name Setting
Normally, this SP mode should not be used. This procedure is necessary only after replacing
the NVRAM, or when the copier malfunctions because the NVRAM is damaged.
1. Enter the SP mode, do SP5801, and press the number for the item that you want to
initialize.
No. What It Initializes Comments
1 All Clear Initializes items 2 to 12 below.
2 Engine Clear
Initializes all registration settings for the engine
and process settings.
3 SCS
(System Control Service)/SRAM. Initializes default
system settings, CSS settings, operation display
coordinates, and ROM update information.
4 IMH Memory Clear
Initializes the image file system.
(IMH: Image Memory Handler)
5 MCS
(Memory Control Service). Initializes the automatic
delete time setting for stored documents.
6 Copier application Initializes all copier application settings.
7 Fax application
Initializes the fax reset time, job login ID, all TX/RX
settings, local storage file numbers, and off-hook
timer.
8 Printer application
Initializes the printer defaults, programs
registered, the printer SP bit switches, and the