Service Program Mode
D017/D018/D019/D020/D084/D085 5-9 SM
System
Maintenance
No. What It Initializes Comments
printer CSS counter.
9 Scanner application
Initializes the scanner defaults for the scanner and
all the scanner SP modes.
10 Network application
Deletes the network file application management
files and thumbnails, and initializes the job login
ID.
11 NCS
(Network Control Service) Initializes the system
defaults and interface settings (IP addresses also),
SmartNetMonitor for Admin, WebStatusMonitor
settings, and the TELNET settings.
12 R-FAX
Initializes the job login ID, SmartNetMonitor for
Admin, job history, and local storage file numbers.
14 Clear DCS Settings Initializes the DCS settings.
15 Clear UCS Settings Initializes: SP5846 (All), SP5801 15
18 SRM Memory Clear Initializes information in non-volatile RAM.
19 LCS Memory Clear Initializes information in non-volatile RAM.
2. Press Execute and turn the main switch off and back on.
To Next Page
Loading...
