System SP Tables-1
D017/D018/D019/D020/D084/D085 4-2 SM Appendix
1003* Registration Buckle Adjustment
1 Tray 1 Adjusts the paper feed clutch timing at
registration. The paper feed clutch timing
determines the amount of paper buckle at
registration. (A larger setting leads to more
buckling.)
[0 to 10 / 5 / 1 mm/step]
2 Tray 2/3/4 By-pass
3 Duplex Side 2
[0 to 20 / 6 / 1 mm/step]
1007*
By-pass Paper Size Detection
Controls paper size detection for the by-pass feed table.
1 Detection Timing
[-15 to 15 / 0 / 5 mm step]
2 LG Detection
[0 to 1 / 0 / -]
0: LT SEF, 1: LG
1103
Fusing Idling
Switches fusing idling on/off.
[0 = Off / 1 = On / 2 = Off plus machine temperature check]
Switch on if fusing on the 1st and 2nd copies is incomplete (this may occur if
the room is cold.)
1104
Fusing Temperature Control DFU
[0 to 1/1/1]
0: Hysterysis Control
1: Normal Control
To Next Page
Loading...
